Kodak Verite 65 Plus - Changing Connection Type to USB from Wi-Fi Connection

English
20
Changing connection type to USB from Wi-Fi connection
If you would like to change the connection type to USB from Wi-Fi
connection, refer to the following instructions.
Microsoft® Windows®
1 Connect the USB cable between this unit and your PC first.
2 Click [Start].
3 Select [All apps] > [KODAK VERITE] > [Device Settings] > [Printer
re-search].
4 Change the connection type automatically.
Apple Mac OS
1 Follow step 1 of “
Install the printer driver to your PC
” for “Using
Wi-Fi (Recommended)” on page 18.
2 Connect the USB cable between this unit and your PC.
3 Activate [System Preferences].
4 Click [Printers & Scanners].
5 Click [+] > [Add printer or Scanner...].
6 Click the printer, select the driver from pull-down menu [Use], then
click [Add].
• Make sure to choose FUNAI KODAK VERITE 65 PLUS of
[USB Multifunction] in [Kind].
7 Select [FUNAI KODAK VERITE 65 PLUS] added.
Continued on next page.