Kodak Verite 65 Plus - Service; Checking Ink Levels; Changing the Ink Cartridge

English
57
Service
Note(s)❏
• If any problems occur, please see the notifications on the Status
Messenger (Windows®).
»»
Refer to “Status Messenger for Windows®” on page 25.
Checking ink levels
Using the Control panel
• From the Control panel, press
until [Ink Levels], then
press
.
Using PC
»»
Refer to “Status Messenger for Windows®” on page 25.
Changing the ink cartridge
CAUTIONC
Use Original Consumable Materials!
• Use only original consumable materials. These are available
from a specialized retailer or through our order service. Other
consumable materials can cause damage to the unit.
Observe Packaging Instructions
• Follow the instructions on the packaging of the consumable
materials.
1 Open the unit by lifting the Ink door.
DO NOT Open During a Print Job!
• Never open the Ink door while printing.
1
2
2 Press the Cartridge tab to open the Cartridge slot.
2
XL 1
XL
P
r
e
s
s
!
P
r
e
s
s
!
3 Remove the cartridges.
2
XL
Color
2
XL
2
XL
Black
S
l
i
d
e
S
l
i
d
e
S
l
i
d
e
S
l
i
d
e
S
l
i
d
e
S
l
i
d
e
4 Remove the Black and Color Ink cartridges from the packaging.
5
■■
L
BLACK
5
■■
L
COLOR
ColorBlack
5 Remove the plastic tape on the Black and Color Ink cartridges using
the red pull tab.
DO NOT TOUCH
• DO NOT TOUCH the gold contact area on the back or the
metal nozzles on the bottom of the Cartridge.
Continued on next page.