English
30
Paper type:
Select the desired Paper type. Ensure that the selected Paper size is used.
Note(s)❏
• Automatic Duplex Printing only supports Paper Size Letter and
A4 with Paper Type [Plain]. With other settings, Automatic
Duplex Printing is not available.
Print Quality:
Select the Quality settings to match the document type to be printed.
You can select the type of Print Quality [Auto/Draft/Normal/Best].
[Auto (default)] Printing with a quality suitable for the Paper
type that is selected.
[Draft] High-speed printing, but low image quality.
[Normal] Standard speed printing and image quality.
[Best] Highest quality image, but printing speed is low.
Sharpen:
Adds sharpness to the image.
[On] Activates Sharpen.
[Off] Deactivates Sharpen.
Collate:
The Collate feature controls the order of printed pages when printing
multiple copies of a document. For example, if you are printing two
copies of a five-page document, then the page order of the collated
output would be 1, 2, 3, 4, 5, 1, 2, 3, 4, 5. The page order of the non-
collated output would be 1, 1, 2, 2, 3, 3, 4, 4, 5, 5.
[On] Activates Collate
[Off] Deactivates Collate
Reverse page order:
[On] Print from the last page.
[Off] Print from the first page.
Page Orientation:
This function allows you to select the direction of printing on a
page. You can set whether to print in Portrait or Landscape format.
Adjusting this setting in the print settings of the application is the
best option as many programs overwrite the settings of the printer
driver.
[Portrait] Portrait indicates vertical orientation, where the
page is taller than it is wide.
[Landscape] Landscape indicates horizontal orientation,
where the page is wider than it is tall.
Resizing Options:
If you would like to resize the printing document, click on [On].
[On] Resizes the printing document to the selected
Paper size.
[Off] Does not resize. Keep the document size.
2-sided printing:
You can select whether to print on one side only or print on both
sides. For both sides printing, you can also select whether the binding
position is along the long edge or the short edge of the paper.
[1-sided] Prints on one side.
[2-sided long edge] Prints on both sides with a margin of long edge.
[2-sided short edge] Prints on both sides with a margin of short
edge.
[Manual 2-sided
long edge]
Prints manually on both sides with a margin of
long edge.
[Manual 2-sided
short edge]
Prints manually on both sides with a margin of
short edge.
Note(s)❏
When [Manual 2-sided long edge] or [Manual 2-sided short edge] is
selected.
• You must manually turn the stack of printed pages over and place
them in the paper support. Before placing the pages with the front
printed sides in the paper support, make sure of the following items to
avoid a paper jam or double-feed:
– All other paper (unused paper) has been removed from the paper support.
– The ink is completely dry.
– The paper is not curled or creased. If it is, flatten the paper.
– Align the corners of the paper.
– A paper jam or double-feed may occur if the paper is in a bad condition
or the printed page is placed incorrectly.
– Maximum number of sheets by Paper type:
Plain paper (20 lb.): 50 sheets (100 pages)
Postcard: 25 sheets
Page Layouts:
[Normal] Prints the Normal printing.
[Multiple pages
per side (N-Up)]
Prints Multiple pages on one side of a paper for
the page layout.
[Poster] Prints a document in a larger format. The Poster
option lets you enlarge a print job to several
times the standard size.
[Mirror] Prints a horizontally flipped document
Note(s)❏
When [Poster] is selected.
• Depending on the poster size that you select, your document is
divided into an equal number of sections, each of which prints
on a full sheet of paper. When all sections have printed, you
can trim the extra white space around each page and join the
individual sheets to create a poster.
Supported size of poster - 2 x 2 (4 pages), 3 x 3 (9 pages), or 4 x
4 (16 pages).
Continued on next page.
To Next Page
Loading...
