TP-6714 4/10 17Section 2 Operation Tests
System OK
LD Exer ##/## @ ##:##
Norm ###V Emer ###V
B View Set Test
Enter Password
Time to Enter #:##
>?
???<
OK
Type of Test
Auto Load
Time :## min
B Main " Start
Type of Test
Loaded
B Main Start
On the main screen, press the Test button.
Use the open arrow buttons to enter the Test
password. See Section 3.4 for instructions. Then
press the OK button.
Press the down arrow button to step to the
loaded test screen.
Press the Start button to initiate the test
sequence.
Press the End Test button to end the test.
System on Test
Norm ###V Emer ###V
End
Main Test
Additional test sequence screens may appear,
depending on the system settings.
Engine Start in ##:##
Norm ###V Emer ###V
End End
Delay Test
Press the Main button to return to the main screen
during the test, if desired. From the main screen,
press Test to return to the test screen.
Figure 2-2 Starting and Stopping the Automatic Operation Test
To Next Page
Loading...
