TP-6714 4/10 25Section 3 Operation
3.5 Normal Operation Screens
During normal transfer switch operation, the screens
shown in Figure 3-9 or Figure 3-10 are displayed. Use
the up and down arrow buttons to view the system status
information as shown. Press Main to return to the main
screen from any screen.
The Sequence of Operation descriptions in Sections 3.6
through 3.9 describe the transfer switch normal
operation for standard, programmed, and closed
transition models, and for service entrance models.
System Ready
LD Exer 12/14 @ 16:00
Norm 480V Emer 480V
B View Set Test
Time/Date
09:10 DST 01/13/06
Standard Transition
BY Main
BY Main
BY Main
BY Main
Normal Preferred
Util-Gen Operation
No Commit Transfer
Norm L1 L2
##Hz ###V ###V
Lamp
BYTe st Main
Emer L1 L2
##Hz ###V ###V
BY Main
Amps L1 L2
#### ####
Daylight Saving Time
Clock Ahead 1 Hour
Sun 03/12/06
BY Main
Daylight Saving Time
Clock Back 1 Hour
Sun 11/05/06
BY Main
Figure 3-9 Single-Phase Operation
System Ready
LD Exer 12/14 @ 16:00
Norm 480V Emer 480V
B View Set Test
Norm AB BC AC
##Hz ###V ###V ###V
Lamp
BYTe st Main
Emer AB BC AC
##Hz ###V ###V ###V
BY Main
Amps LA LB LC
#### #### ####
Time/Date
09:10 DST 01/13/06
Standard Transition
Phase Rotation ABC
In Phase Enabled
BY Main
BY Main
Emer AN BN CN
##Hz ###V ###V ###V
BY Main
Norm AN BN CN
##Hz ###V ###V ###V
BY Main
BY Main
BY Main
Normal Preferred
Util-Gen Operation
No Commit Transfer
Daylight Saving Time
Clock Ahead 1 Hour
Sun 03/12/06
BY Main
Daylight Saving Time
Clock Back 1 Hour
Sun 11/05/06
BY Main
Figure 3-10 Three-Phase Operation
To Next Page
Loading...
