12.19 CHECK AFTER STOPPING ENGINE
1. Walk around the machine and check the work equipment, paint-
work, and undercarriage, and check also for leakage of oil or
water. If any abnormalities are found, repair them.
2. Fill the fuel tank.
3. Check the engine compartment for paper and debris. Clean out
any paper and debris to avoid a fire hazard.
4. Remove any mud stuck to the undercarriage.
12.20 LOCKING
Always lock the following places.
0 Door of operator’s cab
Always remember to close the window.
@ Fuel tank filler port
@ Engine hood
@ Battery box cover
@ Left side door of the machine
@ Hydraulic tank filler port
REMARK
Use the starting switch key to open and close all these places.
AE098130
2-75
To Next Page