12. OPERATION
12.2 STARTING ENGINE
12.12.1 NORMAL STARTING
area, then sound the horn and start the engine.
NOTICE
Do not keep the starting motor rotating continuously for more
than 20 seconds.
If the engine will not start, wait for at least 2 minutes before
trying to start the engine again.
1. Set fuel control dial 0 at the low idling (MINI position.
2. Turn the key in starting switch @ to the START position. The
engine will start.
/
AE097590
HEtT 0:’
START
AE082310
3. When the engine starts, release the key in starting switch 0. The
key will return automatically to the ON position.
HEAT OTF \
’ 1 ON
‘I ’
- START
AE082320
2-44
To Next Page