Komatsu PC400 - Introduction of Attachments

32. INTRODUCTION OF ATTACHMENTS
32.2ATTACHMENT INSTALLATION COMBINATION TABLE
This table lists the combination of attachments which can be installed to the long arm (standard),
short arm and extension arm.
o: Can be used
A: Can be used only for light-duty work
x: Cannot be used
NOTICE
l ‘When the extension arm is equipped, if the bucket is drawn to the machine body, the arm interferes
with the body. Operate the extension arm carefully.
l When the boom is fully lowered during oblique digging, the boom interferes with the undercarriage.
Operate the boom carefully.
Categories of use
For general digging:
digging or loading sand, gravel, clay etc.
For light duty digging: digging or loading dry, uncaked earth and sand, mud etc.
For loading work: loading dry, loose earth and sand
l For digging or loading hard soil or soft rock, it is recommended that the strengthened bucket with
high durability and high wear resistance be employed.
+: Equipped with side cutter
ame of bucket
Rock bucket 1.6 1450 Loading 0 0 0 X X
Ripper bucket 1.0 950 Digging rocks 0 0 0 X X
Clamshell bucket 1.2 866 Ditching, loading 0 0 0 X X
One tooth ripper
Digging, removing rocks o
0 0
X X
5-15