24. SERVICE PROCEDURE
24.7 EVERY 1000 HOURS SERVICE
Maintenance for every 100,250 and 500 hours should be carried
out at the same time.
24.7.1 CHANGE OIL IN SWING MACHINERY CASE
lzireuaaNllx.
The oil is at high temperature immediately after the machine
has been operated. Walt for the oil to cool down before carrying
Container to catch drained oil: Min. 22 ! capacity
Refill capacity: 22 ! (5.8 US gal, 4.8 UK gal)
Set an oil container under drain valve @ under the machine
body.
Loosen drain valve @ under the body, drain the oil, then tighten
the drain valve again.
Remove bleeding plug 0.
Add the specified amout of engine oil through gauge hole 0.
For details of the oil to use, see “20. USE OF FUEL, COOLANT
AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE”.
4. After refilling, install bleeding plug 0.
3-62
To Next Page