a E+;r4;tzs Faaii$c follow these safety precautions may lead
8. PRECAUTIONS FOR MAINTENANCE
l When repairing the electrical system or when carrying out electrical welding, remove the negative
(4 terminal of the battery to stop the flow of current.
A0055170
HANDLING HIGH-PRESSURE HOSES
l Do not bend high-pressure hoses or hit them with hard objects. Do not use any bent or cracked
piping, tubes or hoses. They may burst during use.
l Always repair any loose or broken fuel hoses or oil hoses. If fuel or oil leaks, it may cause a fire.
PRECAUTIONS WITH HIGH PRESSURE OIL
Do not forget that the work equipment circuits are always under pressure.
Do not add oil, drain oil, or carry out maintenance or inspection before completely releasing the
internal pressure.
If oil is leaking under high pressure from small holes, it is dangerous if the jet of high-pressure
oil hits your skin or enters your eyes. Always wear safety glasses and thick gloves, and use a piece
of cardboard or a sheet of wood to check for oil leakage.
If you are hit by a jet of high-pressure oil, consult a doctor immediately for medical attention.
A0055180
A0055190
l-25
To Next Page
Loading...
