11. EXPLANATION OF COMPONENTS
5. From the inside of the operator’s cab, hold the bottom grip with (
the left hand
and the top grip with the right hand, pull up the
window, and
push it in fully until it is locked by catch 0.
I
AEOS1760
6. Lock with lock pins @ on the left and right sides.
7. Connect wiper motor cable from receptacle @.
When closing
A
WARNING
When closing the window, lower it slowly and be careful not to
get your hand caught.
Place the work equipment on flat ground and stop the engine.
2. Securely lock the safety lock lever.
3. Release the lock pin @.
4. Hold the grip at the bottom of the front window with your left
hand and the grip at the top with your right hand, release the lock
of catch @ with your right thumb, then pull the top grip slowly
and lower the front window. When releasing the lock of catch 0,
push release lever (i?j! in the direction of the arrow to release the
lock.
Free
AE096630
I
AE081780
AE081790
2-24
To Next Page
Loading...
