2.
3.
4.
l
0
Turn fuel control dial @ towards the full speed (MAX) position
to increase the engine speed.
Set safety lock lever @ in the FREE position, fold the work
equipment, and raise it 40 - 50 cm (16 to 20 in) from the ground.
Operate right and left travel levers @ or right and left travel
pedals @ as follows.
When the sprocket is at the rear of the machine
Pull levers @ backward slowly or depress the rear part of pedals
@ to move the machine off.
When the sprocket is at the front of the machine
Push levers @forward slowly or depress the front part of
@ to move the machine off.
pedals
Lock
Sprocket ‘AE097750
&rocket AE09776o
2-55
To Next Page
Loading...
