Kongsberg DPS 232 - Standard NAV Engine Configuration

KongsbergDPS232
4Connectthecablefromthemonitor,themouseandthekeyboardtothe
correspondingconnectorsattherearoftheProcessingUnit.
5Connectthe100-240VACship'spowersupplytothepowerconnectorattherear
oftheProcessingUnit.
6Ifavailable,connectthesignalcableswithDGNSScorrectionandexternalgyro
compasstofreeterminalsattherearoftheProcessingUnit.
7Whenallcablesareconnected,powerontheProcessingUnit.Theinstallation
isnowcompletedandsystemcongurationcancontinuethroughtheoperator
software.
Relatedtopics
•SeeCoaxconnectorinstallationonpage38
46
G210-14/3.0