Need help?Do you have a question about the Kongsberg DPS 232 and is the answer not in the manual?
General| Brand | Kongsberg |
|---|---|
| Model | DPS 232 |
| Category | Accessories |
| Language | English |
Details for the intended audience of this installation manual.
Explanation of the conventions and symbols used throughout the document.
Covers limitations regarding guarantee, usage, and ECDIS compliance.
Guidelines for the environmentally sound disposal of electrical and electronic components.
Instructions for careful handling, storage, and transport of the equipment.
Describes the system's intended use and applications in dynamic positioning.
Lists the standard components included in the DPS 232 system delivery.
Details the accuracy and performance metrics for the DPS 232 system.
Provides dimensions for the Processing Unit and associated cabinets.
Specifies voltage, power consumption, and battery recommendations.
Details operating and storage conditions for the system components.
Describes the serial ports, LAN, and USB interfaces on the Processing Unit.
Lists the frequency ranges for GNSS antennas and IALA beacon receivers.
Details the front and rear panel connectors and signal definitions.
Covers general safety guidelines and personnel qualifications for installation.
Provides instructions for positioning the GNSS and IALA antennas.
Guidelines for mounting the system in delivered or standard 19-inch racks.
Detailed steps for the assembly and installation of coax connectors.
Instructions for selecting and installing RF cabling and antenna connections.
Covers connecting antennas, output data, DGNSS corrections, and power.
Procedure for powering on and starting the DPS 232 system.
Describes the available system modes: Operation, Configuration, and Engineering.
Guides users through standard configuration of the NAV Engine.
Details configuring vessel geometry, description, and equipment.
Covers setting up GNSS geometry, processing, SBAS, HP/XP/G2, and IALA.
Explains configuration of input/output ports and serial/ethernet interfaces.
Assists in analyzing logged data and generating a PDF report.
Procedure for copying logged data using the Data Export tool.
Steps to update or create a system backup on a USB stick.
Procedure for restoring the system from a local copy.
Procedure for restoring the system from a backup USB stick.
Instructions for creating a backup stick using a PC.
Outline drawings showing mechanical dimensions of the Processing Unit.
Drawings illustrating the physical dimensions of the 6U cabinet.
Drawings illustrating the physical dimensions of the 12U cabinet.
Mechanical drawing of the GNSS antenna.
Instructions for installing the GNSS antenna.
List of standard components included in the DPS 232 system.
List of optional accessories for the DPS 232 system.
To Next Page