Konica Minolta 9825 - Selecting the Language

20
Konica Fax 9825 User’s Manual
Installing and Setting up the Machine
Loading Paper
Setting the Receive Timestamp
FastAccess: M55
Default = ON
The local header is printed at the top of received faxes if the header option is
on. This header prints above the remote machine header. The local header
includes the date, time and page count of the received fax, plus the local and
remote machine identification. Use this procedure to set the receive header:
1
Press
Menu
.
2
Press
5
to select the Supervisor menu.
3
Press
5
to select the Timestamp menu option.
____Timestamp_____
Timestamp
¾
Yes
Press
Æ
, then ENTER
4
Press
Æ
until the desired setting displays:
Yes or No.
5
Press
Enter
.
6
You can select another option or press
Stop
to go to standby.
Selecting the Language
FastAccess: M56
This feature allows you to change the language for the display messages and
reports. Use the following procedure to select the desired language:
1
Press
Menu
.
2
Press
5
to select the Supervisor menu.
3
Press
6
to select the Language menu option. If your machine supports
more than one language then the following window will display. If your
machine supports only one language then pressing
6
will have no effect.
_____Language_____
Language
¾
English
Press
Æ
, then ENTER
4
Press Æ
repeatedly to select an alternate language.
5
When the desired language displays, press
Enter
.
6
You can select another option or press
Stop
to go to standby.