63
6
Sending a Fax
Broadcast Send
Broadcast Send
The machine allows you to transmit to an
unlimited
number of machines
without programming the destinations into a dial group. You can program
multiple entries in a broadcast send operation using a combination of
preprogrammed groups, keypad dial, one-touch, and speed dial.
When the machine begins transmitting the document, the LCD displays the
remote telephone number. If a number is busy, the machine continues dialing
the rest of the numbers before redialing the busy number.
Any special features stored with a phonebook entry are used when that
phonebook number is dialed in a group.
1
Load the documents face down in the document feeder.
2
If desired, select any special features for the operation.
3
Enter the first telephone number using one of the dialing methods. Press
Enter
.
If one-touch is used to dial the first number, you must disable automatic
start by pressing Enter within 3 seconds or by selecting the Cancel Auto
Start feature. See the "Pauses and other Dial Options" section on page 57.
4
Enter the next telephone number using any dialing method. Press
Enter
.
5
Perform the previous step to enter each additional telephone number.
6
When all numbers have been entered, press
Start
.
If there is a group of fax numbers to which you will send faxes frequently, see
the "
Setting up a Group
" section on page 95.
Group Dial Pause for Incoming Documents
FastAccess: M2318
(Default = 0)
By enabling this feature, you can make the machine pause during a broadcast
to receive any incoming documents. The pause is inserted after 4 consecutive
successful dials during a broadcast job.
1
Press
Menu
.
2
Press
2
to select the Fax menu.
3
Press
3
to select the Fax options menu.
4
Press
1
to select the Outgoing faxes menu option.
5
Press
8
to select the Group dial pause menu option.
To Next Page
Loading...
