66
Konica Fax 9825 User’s Manual
Sending a Fax
Sending Attachments
7
Press
Enter
.
8
Use the keypad to enter the date.
9
Press
Enter
.
10
The machine prompts you to dial a number.
If desired, select any special features for the operation.
Enter the telephone number using one of the dialing methods. If you want
to send this fax to multiple numbers, press
Enter
after each number. When
you have entered all the numbers, press the
Stop
key.
If one-touch is used to dial the first number, you must disable automatic
start by pressing
Enter
within 3 seconds or by selecting the Cancel Auto
Start feature. See the "Pauses and other Dial Options" section on page 57.
11
Press
Start
. At the designated time, the machine will transmit the
document.
Sendin
Attachments
If you have stored a document as described in the "
Programming One-Touch
Keys for Attachments
" section on page 98, you can send these attachments as
faxes either by themselves or after a cover page or other documents you insert
into the document feeder.
➙
To send attachments:
1
If you wish to fax a cover page or other documents in front of the attach-
ment, place them in the scanner. Or, if you want to send the attachment
only, skip to the next step.
2
Enter the destination phone number.
3
Press the One-Touch key that is programmed with the attachment.
4
You may add additional attachments by pressing other One-Touch keys.
The documents will be attached in the order you press the One-Touch
keys.
5
Press
Start
to begin the fax transmission.
Manual Send with Voice Contact
You must have an optional telephone connected to your machine to use this
feature.
To Next Page
