48
Konica Fax 9825 User’s Manual
Copying a Document
Copy Features
4
Use the numeric keypad to enter the desired number of copies (from 1 to
99). The default is 1. Press
Start/Copy
to continue.
5
Use the numeric keypad to enter the desired reduction percentage (from
50 to 200). The default is 100%.
6
Press
Enter
.
7
Press
Start/Copy
to begin the copy operation.
Copy Features
You can set the following options for copying documents:
Resolution
Contrast
Halftone
Auto Background
Long Documents
Collated Copies
These settings are also used when scanning a document to send it as a fax.
Resolution
The resolution for copying is always
Superfine
. When faxing a document, you
can set the resolution using the
Resolution
button.
You may wish to change the default resolution for faxing. See the "
Resolution
"
section on page 68 to set the resolution default for faxes:
Contrast
Documents can be copied or faxed with the normal contrast, light contrast or
dark contrast setting. For a normal document, set the contrast to Normal; for a
document with light, pencil or colored characters, select the Light setting; for a
document with dark characters, select the Dark setting.
You can change the contrast default and contrast threshold levels for copying
and faxing documents
Contrast Default
FastAccess: M421
(Default = Normal)
You may want to change the contrast default.
1
Press
Menu
.
To Next Page
