Konica Minolta 9825 - Scheduling Faxes for a Delayed Start

57
5
Dialing Methods
Linked Dialing
Linked Dialin
g
Linked dialing is a single dialing command that ties together keypad dialing and
phonebook locations for a single dialing operation.
One use of this feature is to link a long distance access code to a telephone
number. For example, you can program phonebook number 1 with the number
of a long distance carrier, phonebook number 2 as an access code, phonebook
number 3 with the number of a remote machine. Any special features stored
with the number (subaddress, delayed start; etc.) causes an error and an
invalid alarm sounds. Group phonebook numbers are not allowed in linked
dialing.
1
Enter the first number using the control panel keypad, one-touch or speed
dial.
2
Press
Redial
.
3
Enter the next number using one-touch, speed dial or the control panel
keypad. Up to 40 total digits may be included in the linked dialing
command.
4
Press
Start
to begin dialing.
Pauses and other Dial Options
FastAccess: M532
The
Pause/Dial Options
key is used either to add a pause to the dialing
sequence or to access several dial options (including a single pause). The
default function for the
Pause
key is defined in the Supervisor menu.
➙
To set the function of the Pause key:
1
Press
Menu
.
2
Press
5
to select the Supervisor menu.
3
Press
3
to select the Control panel menu option.
4
Press
2
to select the PAUSE key menu option.
______Pause______
Pause key:
¾
Pause only
Press
Æ
, then ENTER
5
Press Æ
until the desired setting is displayed:
Pause only or Dial options
menu
.