Konica Minolta 9825 - Number of Redials; Outgoing Faxes Menu

71
6
Sending a Fax
Outgoing Faxes Menu
4
If you selected Enter Now, then enter your charge code number (the
charge code entered will be obscured by the symbol $), press the
Pause
key, then enter the number to be dialed and any other dialing options you
wish. Press
Enter
when done. If you selected
Enter Later, a “C” will appear
in the display. Enter the number to dial and any other dial options you wish,
then press
Enter.
It will then prompt you to enter the charge code.
5
Enter another number to dial or press
Start
to send the fax.
Out
g
oin
g
Faxes Menu
FastAccess: M231
Use the Outgoing faxes menu to set the features described in the following
sections.
Number of Redials
FastAccess: M2311
(Default = 5)
Use this feature to select the number of times the machine redials a number if
the remote machine is busy or does not answer. Bear in mind that if an
incorrect phone number is entered, the machine would dial the incorrect
number this many times as well. The machine enters a redial wait mode, then
redials the number.
1
Press
Menu
.
2
Press
2
to select the Fax menu.
3
Press
3
to select the Fax options menu.
4
Press
1
to select the Outgoing faxes menu option.
5
Press
1
to select the Number of redials menu option.
_Number_of_redials_
Redials:
¾
5
Enter number 0-15
6
Use the keypad to enter the number of redials: 0-15 .
7
Press
Enter
.