Konica Minolta bizhub 163 Service Manual

6. Other Field Service Ver. 1.0 Apr. 2007
76
bizhub 163/211/220Maintenance
22. Wind the upper cable of wire pulley 2
around pulley D [1] and hook it onto
the hook.
NOTE
• Wind the cable around the inner
groove in pulley D.
23. Peel off the pieces of tape that
secure the front and rear cable pul-
leys.
24. Peel off the tape used to temporarily
secure the cables to the machine
frame. Hook a spring to the leading
edges of the front and rear cables
[1].
25. Temporarily secure the scanner to the front and rear cables.
26. Adjust the position of the scanner and the 2nd/3rd mirrors carriage.
See P.146
6.3.31 Main motor (M1)
1. Remove the rear cover.
See P.47
2. Remove two screws [1], and remove
the metal plate [2].
[1]
A09AF2C527DA
[1]
A09AF2C528DA
A09AF2C053DA
[1]
[2]

Konica Minolta bizhub 163 Specifications

General

Print Technology	Laser
Print Speed	16 ppm
Max Paper Size	A3
Resolution	600 x 600 dpi
Copy Speed	16 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Connectivity	USB 2.0
Paper Input Capacity	250 sheets
Paper Output Capacity	100 sheets
Memory	32 MB
Type	Monochrome
Duplex Printing	Manual
Network Connectivity	Optional
Dimensions	570 x 531 x 449 mm
Zoom Range	50% - 200%