Konica Minolta bizhub 163 Service Manual

Field Service Ver. 1.0 Apr. 2007 5. Firmware upgrade
35
bizhub 163/211/220Maintenance
5.2 Firmware rewriting
5.2.1 Updating method
1. Turn ON the power switch of the machine.
2. Start the host computer.
3. Copy the “Update Software” folder and “Update” file to drive C. (Copy them into the
highest directory on drive C.)
4. Connect the machine to the host computer using a USB cable. (Wait until the hardware
is detected.)
5. Open “Properties” of “My Computer.” Then select System Properties/Hardware/Device
Manager/Imaging devices to check that the “XXXXXXXXXXX” (Model Name) icon has
been added.
6. Double-click the “Update” file in the “Update Software” folder.
The “TenryuS Update F/W-VXXX” screen will appear.
7. Click the [Browse] button. Then, select the “Update” file that has been copied onto drive
C in step 3.
A09AF2E627DA
A09AF2C622DA
A09AF2C623DA

Konica Minolta bizhub 163 Specifications

General

Print Technology	Laser
Print Speed	16 ppm
Max Paper Size	A3
Resolution	600 x 600 dpi
Copy Speed	16 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Connectivity	USB 2.0
Paper Input Capacity	250 sheets
Paper Output Capacity	100 sheets
Memory	32 MB
Type	Monochrome
Duplex Printing	Manual
Network Connectivity	Optional
Dimensions	570 x 531 x 449 mm
Zoom Range	50% - 200%