Konica Minolta bizhub C203 Service Manual

6. Finisher operations Field Service Ver. 1.0 Jul. 2007
62
FS-519/PK-515/OT-602
Adjustment / Setting
6. Finisher operations
6.1 Entering Finisher
1. Call the Service Mode to the screen.
See P.330 of the main body service manual.
2. Touch [Finisher].
3. Touch [CB-FN adjustment].
4. Touch [Finisher Check].
5. Touch the item one wants.
6.2 Finisher Check
A. Staple CD Unit
• Returns the staple unit to the predetermined position after it moves to the 2-point stapling
position for A4.
→ Moves from the predetermined position to the inner 2-point stapling position for A4.
→ Moves from the starting position and stops after the predetermined time.
→ Moves to the front of A4.
→ Moves from the starting position and stops after the predetermined time.
→ Moves to the predetermined position.
→ The operation is finished.
B. Alignment Moving
• Aligning plates 1 and 2 return to the predetermined position after moving to the aligning
position for A4S.
→ Moves from the predetermined position to the second predetermined position for A4S.
→ Stops after the predetermined time.
→ Moves to the aligning position for A4S.
→ Stops after the predetermined time.
→ Moves to the predetermined position.
→ The operation is finished.
A01GF3E506DA

Konica Minolta bizhub C203 Specifications

General

Print Resolution	600 x 600 dpi
Print Technology	Laser
Memory (Standard)	1 GB
Paper Output	250 sheets
Scan Resolution	600 x 600 dpi
Print Speed	20 ppm (black/color)
Copy Speed	20 cpm (black/color)
Standard Paper Size	A4, A5, B5
Connectivity	Ethernet (10/100Base-TX), USB 2.0
Weight	85 kg
Functions	Print, Copy, Scan
First Print Time (Color)	15 seconds
Duplex Printing	Yes
Scan to	Email, FTP, USB
Paper Capacity	Standard: 1, 150 sheets
Type	Color Multifunction Printer