Konica Minolta SKR 3000 User Manual

120
6.1 Maintenance and inspection items
3
Peel off the center piece of the release
paper from the AeroDR Grip sheet, and
temporarily a󰀩x the sheet to the required
position on the DR Detector.
AeroDR Grip sheet
a󰀩xing position
Release paper
AeroDR Grip sheet
IMPORTANT
•••••••••••••••••••••••••••••••••••••
• Place the AeroDR Grip sheet in the correct position
so that it does not overlap the DR Detector label.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
4
Peel off the left and right pieces of the
release paper from the AeroDR Grip sheet
and a󰀩x the sheet to the required position
on the DR Detector.
AeroDR Grip sheet
AeroDR Grip sheet
a󰀩xing position
IMPORTANT
•••••••••••••••••••••••••••••••••••••
• Affix the sheet slowly from the center to the right
and left sides to attach it tightly to the DR Detector.
• Conrm that the AeroDR Grip sheet has been se-
curely placed.
•••••••••••••••••••••••••••••••••••••••••••••••••••••
5
Repeat the same steps to affix the other
three sheets.

Konica Minolta SKR 3000 Specifications

General

Brand	Konica Minolta
Model	SKR 3000
Category	Measuring Instruments
Language	English