Konica Minolta SKR 3000 - Detector Interface Unit 2

49
Chapter 2
2.2 Component names and functions
2.2.7 Detector Interface Unit 2
The component names and functions of the Detector Interface Unit 2 are as follows.
(2) LED
(6) Unit fixed plate
(1) Top plate
(3) Cable outlet
(4) Sync port
(5) LAN port
(7) Location for connecting
the grounding cable
Number Name Functions
(1) Top plate Protects the internal parts.
(2) LED Indicates the status of the Detector Interface Unit 2.
(3) Cable outlet Outlet for I/F Cable.
(4) Sync port
• Connects to the Ethernet cable.
• Relays signals for serial exposure.
(5) LAN port Connects to the Ethernet cable.
(6) Unit xed plate Used to attach this device to a wall stand or table, etc.
(7)
Location for connecting the grounding
cable
Used to connect the grounding cable. Not usually used.