Kontron KT690/mITX - Advanced Settings - Trusted Support; Advanced Settings - USB Configuration

KT690 Family
KTD-00738-C Public User Manual Date: 2008-09-16 Page 75 of 91
8.3.10 Advanced settings – Trusted Support
BIOS SETUP UTILITY
Advanced
Trusted Computing
TCG/TPM Support [No]
Enables/Disable TPM
TCG (Tpm 1.1/1.2)
Support in Bios
<- Select Screen
|| Select Item
+- change option
F1 General Help
F10 Save and Exit
ESC Exit
V02.59+ (C)Copyright 1985-2005, American Megatrends, Inc.
Feature Options Description
TCG/TPM Support
No
Yes
Enables/Disable TPM TCG (TPM 1.1/1.2) Support.
8.3.11 Advanced settings – USB Configuration
BIOS SETUP UTILITY
Advanced
USB Configuration
Module Version – 2.24.2-13.4
USB Devices Enabled :
1 Drive
Legacy USB Support [Enabled]
USB 2.0 Controller Mode [HiSpeed]
BIOS EHCI Hand-Off [Enabled]
USB Mass Storage Device Configuration
Enables support for
legacy USB. AUTO
option disables if no
USB Devices are
connected.
<- Select Screen
|| Select Item
+- change option
F1 General Help
F10 Save and Exit
ESC Exit
V02.59+ (C)Copyright 1985-2005, American Megatrends, Inc.
Feature Options Description
Legacy USB Support Disabled
Enabled
Auto
Support for legacy USB Keyboard
USB 2.0 Controller Mode FullSpeed
HiSpeed
Configure the USB 2.0 controller in HiSpeed
(480Mbps) or FullSpeed (12Mbps).
Note: This feature is not available when Failsafe
Defaults are loaded, because USB2.0 controller is
disabled as default.
BIOS EHCI Hand-Off Enabled
Disabled
This is a workaround for OSes without EHCI hand-
off support. The EHCI Ownership change should
claim by EHCI driver.