KT690 Family
KTD-00738-C Public User Manual Date: 2008-09-16 Page 87 of 91
8.8 Power
BIOS SETUP UTILITY
Main Advanced PCIPnP Boot Security Chipset Power Exit
Exit Options
Power Management/APM [Enabled]
Power Button Mode [On/Off]
Restore on AC Power Loss [Power On]
RTC Resume [Disabled]
PME/WOL Enable [Disabled]
PS/2 Kbd/Mouse S4/S5 Wake [Disabled]
Keyboard Wake Hotkey [Any key]
Enable/Disable SMI
based power management
and APM support
<- Select Screen
|| Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
V02.59+ (C)Copyright 1985-2005, American Megatrends, Inc.
Feature Options Description
Power Management/APM Disabled
Enabled
Enable/Disable SMI based power management and
APM support
Power Button Mode Disabled
Standby
Suspend
Disabled
Standby
Suspend
Restore on AC Power Loss
Power On
Power Off
Last state
Select whether or not to restart the system after AC
power loss (ATX +5VSB signal goes high):
Power Off keeps the power off until the power
button is pressed.
Power On restores power to the computer.
Last State use same power state as before power
loss occurred.
RTC Resume
Disabled
Enabled
RTC to generate a wake event
PME/WOL Enable
Disabled
Enabled
Disabled/Enabled PME to power on system with
Wake on Lan function
PS/2 kbd/Mouse S4/S5 Wake
Disabled
Enabled
Enabled: System can be waked also from S4 or S5.
Disabled: PS/2 KBD/MSE can still wake system from
S3
Keyboard Wake Hotkey
Any key
“SPACE”
“ENTER”
“Sleep button”
Any key
“SPACE”
“ENTER”
“Sleep button”
To Next Page
Loading...
