Korg MONOLOGUE - Page 27

27
Whenaknobisturnedwhileonebuonishelddown,motionwillbere-
cordedforthatstep.Whenaknobisturnedwhilemultiplebuonsareheld
down,amotionwillberecordedforthosesteps.
Forexample,whenturningtheINTknoboftheLFOto50%whileholding
downbuons3and5,theINT50%seingfortheLFOwillberecordedon
bothsteps3and5.Althoughonlycontinuousvaluechangescanberecord-
edwhenrecordingamotionsequencewithreal-timerecording,thisfunc-
tioncanbeusedtorecordmotionchangesforeachstep.
PresstheRECbuonandmovetheknobsorswitchesduringsequencer
playbacktorecordamotionsequence.
Pressingbuons1–16whileholdingdownSHIFTwillturntheactivestep
forthecorrespondingstepsON(thebuonwilllight)orOFF(thebuon
willgodark).Duringsequencerplaybackorsteprecording,thestepswill
beskippediftheiractivestepisturnedOFF.
3.
When the number of steps that are recorded are nished, editing will au-
tomatically stop.
Other editing functions
UsetheSEQEDITmodewhenseingtheStepLengthandStepResolution
parametersduringsequencesteprecording,aswellasfordeletingsequence
data,orforeditingordeletingmotions.Fordetails,referto“SEQEDITmode”
(p.35).