Koso RX2N - 5-4 Over Heat Warning Light (Oil Temperature) Setting; Setting Oil Temperature Overheat Warning Threshold

Press the Adjust button to select the other
setting screens.
Press the Select button to return to a 3 setting
screen.
EX. Now the setting is changed from 10
to 102 .
o
0.0 C
o
.0 C
When you leave this screen, the setting
is finished.
If you just want to make this function setting, you could
press down the Select button for 3 seconds to back to
the main screen.
5-3
Over heat warning light (Water temperature) setting
5-4
Over heat warning light (Oil temperature) setting
P.S.P.S.
The over heat warning light
(Oil temperature) will flash
when the temperature reached
your setting.
In a 4 screen, press the Select button to enter
the over heat warning light (Oil temperature)
setting screen.
EX. Now the over heat warning light (Oil
temperature) setting is 10 .
o
0.0 C
Now the water temperature logo and the
setting value are flashing!
The over heat warning light setting
range: 60~
Setting unit:
oo
250 C ( F).
140~482
oo
1C (F).
EX. You want to set the over-heat warning
o
light (Oil temperature) at 102.0 C.
Press the Select button to move to the digit
you want to set.
Press the Adjust button to choose the setting
value.
The setting unit will change together with the
unit setting (4-4).
Next page
CDI & FI CDI & FI