6-1
Target speed timer test
WARNING!
In power test screen, press the Select button
one time to enter the target speed timer test
screen.
Please use this function at racetrack to avoid
traffic accidents.
Please start the test when the bike stops.
If you have the power test record, it will
display the record first. You must clear the
record before starting a new test.
Press the Adjust button to clear the record
and enter the target speed timer test screen.
EX. Now you could see the record you have
before. It displays the target speed timer
setting as 0~110 km/h, the test result: 19"20
seconds. The top speed is 110 km/h during the
test., The Max. RPM is 10,000 RPM during the
test.
If you just want to check the record, you could press down
the Select button for 3 seconds to back to the main screen.
When the bike moves, the timer will start
automatically.
Now the is flashing!
About the power test setting, please
check 5-5.
The record display screen
Enter the testing screen if no record
Enter the testing screen
Next page
P.S.P.S.
The timer is automatic, so when
your bike start to move the
timer will start to count the time
and stop automatically after you
stops the bike.
During the test, the will keep flashing!
When you reach the target speed you set (0~
110 km/h), the timer will stop counting (19"20
second).
If you just want to use the function one time, press down
the Select button for 3 seconds to save the records and
back to the main screen.
If you want to test it again, press the Adjust
button to clear the record and enter the
target speed timer test screen again.
Speed up
0 km/h 3 km/h 110 km/h
P.S.P.S.
If you don't reach the target
speed or stop accelerating
during the test, you could press
the Adjust button to stop the
timer. Then you could press the
Adjust button one time to clear
the record and enter the target speed timer test screen.
Speed up
Test
failure
3 km/h0 km/h
CDI & FI CDI & FI
To Next Page
Loading...
