EX. The sensor point you want to set is 6.
Press the Select button to move to the digit
you want to set.
Press the Adjust button to choose the setting
value.
Press the Select button to enter the sensor
point setting screen.
EX. Now the circumference setting is changed
from 1,000 mm to 1,300 mm.
Now the sensor point setting value is flashing!
The sensor point setting range: 1~60
points.
Next page
Press the Adjust button to choose the setting
value.
5-6
Tire circumference and sensor point setting
Press the Adjust button to select the other
setting screens.
Press the Select button to return to a 6 setting
screen.
EX. Now the sensor point setting is changed
from 1 to 6.
When you leave this screen, the setting
is finished.
If you just want to make this function setting, you could
press down the Select button for 3 seconds to back to
the main screen.
CDI & FI CDI & FI
To Next Page
Loading...
