The meter doesn't work
when the power is on.
The meter shows wrong
information.
The power doesn't supply to the meter.
Please make sure the wiring is
connected. The wiring and fuse are not
broken.
The battery is broken or the battery is too
old to supply enough power (DC 12V) to
make the meter work.
Please check the voltage of your
battery, and make sure the voltage is
over DC 12V.
Speed does not appear
or appear incorrectly.
Please make sure the speed sensor is
connected correctly.
Please check the tire-size setting.
please refer to the manual 5-6.
It is possible that the positive wire is
connected wrongly.
Please check is the red positive wire
connect to the permanent power or
battery and the brown positive wire is
connected to the key on switch
positive pole.
It is possible that the permanent power
wire is not connected well.
Please check the red positive wire is
connect well or not.
The odometer and trip
meter is not
accumulated or
accumulated wrong
data.
When switch off, the
needle doesn't return
to 0.
Tachometer does not
appear or appear
incorrectly.
Please check the RPM sensor wiring is
connected correctly.
Please check the spark plug is R type
or not. If not, please replace the spark
plug with the R type spark plug.
Please check your setting.
Please refer to the manual 5-7.
Temp does not appear
or appear incorrectly.
Please check the sensor.
Does the wiring break or falling off ?
Please check your fuel tank.
Is there any fuel inside ?
Please check the wiring.
Do you connect the wiring correctly ?
Please check the setting.
Please refer to the manual 5-8.
7
Trouble shooting
The following situation do not indicate malfunction of the meter.
Please check the following before taking it in for repair.
Trouble TroubleCheck item Check item
If still can't solve the problems according to the steps above, please
contact with distributors or us.
Fuel gauge does not
appear or appear
incorrectly.
The clock is incorrect.
CDI & FI CDI & FI
To Previous Page
Loading...
