Back:
Short press (Power/OK) Button once to confirm and exit Setup
Menu. Or short press (Menu) Button once to exit Setup Menu.
Resolution: 4K(default), 2K, 1080P
Front camera resolution. The higher resolution of video clearer it is, but
the more storage space it will take up.
Loop Record: 1MIN (default), 3MIN, 5MIN
Set the duration of each video segment archives.
The camera records in loop and the oldest Un-locked video segment will
be automatically deleted and covered by the latest one when the
memory card gets full, so you don’t need to delete videos frequently.
Note: Locked videos in Front_emr and Back_emr files WON’T be deleted
by Loop Record automatically, which needs to delete manually.
Timelapse: Off (default), 1s(fps), 2s(fps), 3s(fps)
The camera will fulfill 24h Parking Monitoring. (Hardwire kit needed.)
It records what happened during parking at a lower rate-bite while
parking. When you play back the video, it seems to fast forward.
Note: If the camera is in time-lapse recording, press-buttons CAN’T fulfill
functions except lock or unlock video. If you want to do any operations
on the device, start your vehicle first to exit time-lapse recording.
License: Off (default), On
Watermark of Licence Plate Number to stamp onto videos.
How to turn on and edit/modify your license plate number?
① In video mode, stop recording first, short press (Menu) Button
once to access Setup Menu;
② S
hort press (Down) Button to navigate to Licence, and short
press (Power/OK) Button once to access the submenu;
③ Short press (Down) Button to navigate to “On”, short press
(Power/OK) Button once to confirm to turn ON Licence watermark,
then it accesses a page to edit and modify license plate number;
④
In the page, short press (UP)/ (Down) Button to navigate a
letter/number you want, and short press (Power/OK) Button once
to confirm the letter/number, then it will skip to next column;
To Next Page
Loading...
