KQQ K8 - Auto Power Off; Screen Saver; Frequency; USB Mode

26
 USB Mode: USB Storage, Charge (default)

Back Mirror: On, Off (default)
Flip the rear camera view horizontally.
Note: After connecting the rear camera, if you find that its camera view
is right-left reversal, please set "Back Mirror" to flip the rear camera view.

Speaker: Mute, Low (default), Middle, High
Set the volume level of the built-in microphone speaker. It will affect
buttons beep volume, playback video volume, boot volume..

Boot Sound: Off, On (default)
Select to turn o/off the start-up tone of the dash cam.
 Key Sound: Off, On (default)
Choose whether to make a beep when pressing buttons.

Language:
English, German, Spanish, Traditional Chinese, Simplified Chinese,
Japanese, Russian, Italian, French,
Select the language of dash cam according to your preference.
 Date/Time:
Year/Month/Date, Hour/Minute, Date Format, Time Format
Set the current date and time manually. (See page 16)
 Time Zone
Set the time zone of your location. (See page 16)
 Speed Unit: KMH (default), MPH
Set the speed unit that will show on videos.
Note: This settings appears only when the GPS module connected.
 GPS Test
Note: This settings appears only when the GPS module connected.
 Format: Fast format, Cancel, Confirm
Format TF card manually via this camera to make camera work well.
Select Fast format can format SD card quickly, otherwise it will take
more time to finish the format.