3. Perform the following actions:
▪ Click All Off to turn the device on/off.
▪ Click Display On / Display Off to send a CEC command to the display on the
KIT-400R.
▪ Click HDMI 1, HDMI 2 and so on, to select an input.
▪ Click any of the default available buttons, as needed.
KIT-400 panel is viewed, and the relevant commands are carried out.
Configuring the Device Control Panel
The default device control panel items can be configured to suit your needs. Each item on the
panel can be modified and new items can be added. The Edit Panel window includes a
display of the current device control panel, the properties area to the right, the Object List
below and three Add buttons to add new items to the panel next to the Object List.
The KIT-400T Device Panel Control Panel enables performing the following actions:
• Selecting Panel Model on page 49.
• Setting the Panel Background on page 50.
• Defining Panel Configuration Grid on page 50.
• Modifying a Button on page 50.
• Modifying Text on page 52.
• Modifying a Frame on page 54.
• Adding a New Button on page 55.
• Adding a New Text Field on page 57.
• Adding a New Frame on page 58.
To Next Page
Loading...
