Contents
Introduction 1
Getting Started 1
Overview 2
Typical Applications 3
Defining VP-440X 4K Presentation Switcher / Scaler 5
Mounting VP-440X 7
Connecting VP-440X 8
Connecting to VP-440X via RS-232 9
Wiring RJ-45 Connectors 9
Operating and Controlling VP-440X 10
Using Front Panel Buttons 10
Connecting the Remote Control Switches 10
Using the OSD Menu 11
Operating via Ethernet 20
Using Embedded Webpages 23
Loading and Saving Configurations 25
Entering Standby Mode 26
Configuring Video Input Settings 26
Switching an Input to the Outputs 27
Freezing / Blanking Video Outputs 28
Adjusting Microphone and Output Volume 28
Viewing Device Settings 29
Upgrading Firmware 29
Configuring Network Settings 31
Configuring Video Output Settings 32
Configuring HDCP per Input/Output 34
Managing EDID 35
Adjusting Audio Input Settings 37
Adjusting Microphone Settings 38
Defining Additional Audio Settings 38
Setting Equalizer 38
Setting Auto Sync Off 39
Configuring Automatic Switching Settings 40
Defining Lock Mode 40
Controlling via the RS-232 Terminal Block Connectors 41
Password Protecting Webpage Access 44
Viewing Device Information 46
Upgrading Firmware 47
Technical Specifications 48
Default Communication Parameters 50
Input Resolution Support 50
Output Resolution Support 51
Default EDID 51
Protocol 3000 58
Understanding Protocol 3000 58
Protocol 3000 Commands 59
Result and Error Codes 67