Kramer VP-440X

Kramer Electronics Ltd.
VP-440X – Using Embedded Webpages
28
Freezing / Blanking Video Outputs
To freeze or clear the video output, do one of the following:
1. In the Navigation pane click Switching. The Switching page appears (Figure 11).
2. In the Video Switching area, click the following:
▪ – Freezes the currently displayed video frame.
▪ – Clears the video output from the display; the display goes blank.
The output is set to freeze or blank.
Adjusting Microphone and Output Volume
The microphone and output volume can also be adjusted from the Audio webpage.
To adjust the microphone and output volume:
1. In the Navigation pane click Switching. The Switching page appears (Figure 11).
2. Use the slider controls in the Volume area of the webpage (or enter the volume level).
3. Click to mute the output.
The microphone and/or output volume is adjusted.