Kramer VP-440X

Kramer Electronics Ltd.
VP-440X – Using Embedded Webpages
37
Adjusting Audio Input Settings
VP-440X enables you to individually define the audio volume and source for each of the
inputs via the Audio webpage.
To adjust audio input settings:
1. Click Audio on the Navigation List.
The Audio page appears.
Figure 24: The Audio Settings Page
2. In the Delay drop-down box, set the audio delay time in milliseconds.
3. In the Input area:
▪ Use the slider controls or enter a number from 0 to 100 in the field to adjust the HDMI
and PC volume per input.
▪ For each HDMI input, select an audio source option for each of the HDMI inputs:
 Automatic – the embedded audio on the HDMI input is selected for an HDMI
signal, or the analog audio input is selected if the input is not HDMI (for example,
for a DVI input signal).
 Analog – the analog audio input is selected.
 Embedded – the embedded audio in the HDMI signal is selected.
Audio settings are defined.