Kramer VP-440X

Kramer Electronics Ltd.
VP-440X – Using Embedded Webpages
25
• Upgrading Firmware on page 29.
• Configuring Network Settings on page 31.
• Configuring Video Output Settings on page 32.
• Configuring HDCP per Input/Output on page 34.
• Managing EDID on page 35.
• Adjusting Audio Input Settings on page 37.
• Adjusting Microphone Settings on page 38.
• Defining Additional Audio Settings on page 38.
• Setting Equalizer on page 38.
• Setting Auto Sync Off on page 39.
• Configuring Automatic Switching Settings on page 40.
• Defining Lock Mode on page 40.
• Controlling via the RS-232 Terminal Block Connectors on page 41.
• Password Protecting Webpage Access on page 44.
Loading and Saving Configurations
VP-440X enables you to save a configuration to recall it in the future.
Saving a Configuration
To save the current configuration:
1. Configure the device as required.
2. In the Navigation pane, click Switching. The Switching page opens (Figure 9).
3. Click Save.
The Save File window appears.
When using Chrome, the file is automatically saved in the Downloads folder.
The current configuration is saved.
Loading a Configuration
To load a configuration:
1. In the navigation pane click Switching. The Switching page opens (Figure 9).
2. Click Upload.
An Explorer window opens.
3. Select the required file and click Open.
The device is configured according to the saved preset.