Kramer VP-734

VP-734 - Configuring the VP-734 via the OSD MENU Screens
31
Feature
Function
Parameter Setting Area
Text Color Dropdown Box
Select the Text color
Transparency Dropdown
Box
Select the transparency level (0 to 7)
Background Color
Dropdown Box
Set the text background color
Vertical Position
Set the vertical position of the text background on the display
screen (Top, Center or Bottom)
Font Size
Select the text overlay font size
Logo
Logo Enable
Enable the logo to appear on screen
Logo Position
Set the position of the logo
Communication Interface Area
Connect/Disconnect
Connect the machine or disconnect
TCP/IP Check box
Not available
RS-232 Check box
When selected, set the COM port and Baud Rate (9600) to
connect via the RS-232 connector
IP Address
When selected Set the IP address of the device and the port
Current Status
Indicates whether there is a valid connection to the VP-734
Scrolling Mode Area
Speed Dropdown Box
Set the speed at which the text moves on the display
Mode
Set to Still (fixed text) or Scrolling (text moves across the
display)
Left to Right
Set direction of the scrolling text
Send Text Area
Message
Type the desired text in the Message box
H-Offset (Still
Mode)Dropdown Box
After selecting the Still mode, use the H-Offset box to select
the horizontal position of the text (Left Center or Right)
Operation Buttons
Start Button
Click to display the text on screen
Stop Button
Click to stop scrolling on screen
Quit Button
Click to quit the program
Load Setting Button
Click to load a previously saved setting
Save Setting Button
Click to save the current setting