Kramer VP-734

32
VP-734 - Configuring the VP-734 via the OSD MENU Screens
7.5.4 The Input Functions Screen
The following table defines the input settings:
Setting
Function
Default
Custom
Custom Input from Custom 1 to custom 4
Custom 1
Note that you can set the custom resolution to
a value of up to 2046x1200
HT
Horizontal Total
HW
Horizontal sync pulse width
HS
Horizontal active start point
HA
Horizontal active region
HP
Horizontal polarity
VT
Vertical Total
VW
Vertical sync pulse width
VS
Vertical active start point
VA
Vertical active region
VP
Vertical polarity
OCLK
Output clock
Enable
Set to On to enable parameter change
Off
Save
Apply settings
N/A
7.5.5 The Output Functions Screen
The following table defines the output settings:
Setting
Function
Default
Custom Output
Custom output from Custom 1 to Custom 4
Custom 1
Note that you can set the custom resolution to a
value of up to 2046x1200
HT
Horizontal total
1344
HW
Horizontal sync pulse width
136
HS
Horizontal active start point
296
HA
Horizontal active region
1024
HP
Horizontal polarity
VT
Vertical total
806
VW
Vertical sync pulse width
6
VS
Vertical active start point
35
VA
Vertical active region
768
VP
Vertical polarity
OCLK
Output clock
65
Save
Save setup
Get Current
Import the values of the currently selected output resolution
into the User Mode Setting