VS-211XS, VS-411XS – Mounting VS-211XS / VS-411XS
Mounting VS-211XS / VS-411XS
This section provides instructions for mounting VS-211XS. Before installing, verify that the
environment is within the recommended range:
• Operation temperature – 0 to 40C (32 to 104F).
• Storage temperature – -40 to +70C (-40 to +158F).
• Humidity – 10% to 90%, RHL non-condensing.
Caution:
• Mount VS-211XS / VS-411XS before connecting any cables or power.
Warning:
• Ensure that the environment (e.g., maximum ambient temperature & air flow) is
compatible for the device.
• Avoid uneven mechanical loading.
• Appropriate consideration of equipment nameplate ratings should be used for avoiding
overloading of the circuits.
• Reliable earthing of rack-mounted equipment should be maintained.
• Maximum mounting height for the device is 2 meters.
Mount VS-211XS / VS-411XS in a rack:
• Use the recommended rack adapter
(see www.kramerav.com/product/VS-211XS / www.kramerav.com/product/VS-411XS).
Mount VS-211XS / VS-411XS on a surface using one of the
following methods:
• Attach the rubber feet and place the unit on a flat surface.
• Fasten a bracket (included) on each side of the unit and attach it to
a flat surface. For more information go to
www.kramerav.com/downloads/VS-211XS /
www.kramerav.com/downloads/VS-411XS.
To Next Page
Loading...
