Contents
Introduction 1
Getting Started 1
Overview 2
Typical Applications 3
Defining VS-44H2 4K 4x4 Matrix Switcher 4
Mounting VS-44H2 6
Connecting VS-44H2 7
Connecting to VS-44H2 via RS-232 8
Operating VS-44H2 Via Front Panel Buttons 9
Switching Inputs to Outputs 10
Switching an Input to All the Outputs 10
Muting Outputs 10
Switching a Pattern to an Input 11
Storing and Recalling Presets 11
Locking and Unlocking Front Panel Buttons 12
Assigning EDID to Inputs 12
Operating via Ethernet 13
Using Embedded Webpages 16
Browsing VS-44H2 Webpages 17
Defining Global Settings 18
Routing Inputs to Outputs 21
Defining HDMI Input Port Parameters 23
Defining HDMI Output Parameters 24
Managing EDID 27
Configuring Device Automation 32
Restarting and Resetting to Factory Default Parameters 33
Changing Device Name 35
Setting Authentication 36
Changing the Ethernet Settings 37
Performing Firmware Upgrade 39
Setting Date and Time 40
Viewing General Version Information 41
Upgrading Firmware 42
Technical Specifications 43
Default Communication Parameters 44
Default EDID 44
Protocol 3000 46
Understanding Protocol 3000 46
Protocol 3000 Commands 47
Result and Error Codes 62
To Next Page
Loading...
Need help?
General
