Kramer VS-44H2

Kramer Electronics Ltd.
VS-44H2 – Using Embedded Webpages
21
Routing Inputs to Outputs
VS-44H2 enables routing an input signal to an output via the Routing Settings page This
section describes how to basically route an A/V input to any of the outputs.
To define the signal type, see Setting HDMI Output Signals on page 22.
By default, input and output ports are set to audio-follow-video.
The Routing Matrix page displays the current routing status. For example, in Figure 14 the
HDMI 1 input is currently routed to the HDMI 1 output as indicated by the green routing button
( ).
Figure 14: Routing Matrix Page – Input to Output Example
To route an input to an output:
1. In the Navigation pane, click Routing Settings. The Routing Settings page appears.
2. Click a white routing button within the matrix. For example, to route the HDMI 3 input to
the HDMI 1 output, click the routing button connecting them in the matrix:
Figure 15: Routing Settings Page – Routing an Input to an Output