Kramer VS-44H2

Kramer Electronics Ltd.
VS-44H2 – Using Embedded Webpages
36
Setting Authentication
By default, the webpages are secured (username and password are both: Admin) and
require login credentials.
To access webpages without using the password:
1. In the Navigation pane, click Settings. The General tab in the Settings page appears
(see Figure 34).
2. Click OFF next to Security.
The following message appears:
Figure 36: Authentication – Disabling Authentication
3. Enter the current password and click Save.
The device settings page no longer shows the authentication details:
Figure 37: Authentication –Security Deactivated
Webpages are accessed without authentication.
To access webpages using the password:
1. In the Navigation pane, click Settings. The General tab in the Settings page appears
(see Figure 34).
2. Click ON next to security. The following message appears:
Figure 38: Authentication – Activating Security