Removing and Adding an Input
VS-44H2 enables removing an input from the priority list when auto switching is set to the
Priority or Last Connected switching modes.
To remove or add an input to the priority list:
1. In the Navigation pane, click Routing Settings. The Switching page appears.
2. Open a selected HDMI Output settings window (for example, the HDMI output).
3. Select an output and set the switching mode to Priority or Last connected.
4. Perform the following:
▪ Remove an input by clicking X beside the input (for example, HDMI 1).
▪ Add an input back by opening the Add an input drop-down box and select that
input.
Figure 23: Deleting / Adding HDMI 1 from the Priority List
Managing EDID
You can copy EDID to any of the inputs in any of the following ways:
• Copying the EDID from an Output on page 28.
• Copying the EDID from an Input on page 30.
• Copying the Default EDID to an input on page 31.
• Loading a Customized EDID File on page 32.
The selected EDID can be copied to the selected input/s.
To Next Page
Loading...
