Kramer VS-44H2

Kramer Electronics Ltd.
VS-44H2 – Using Embedded Webpages
31
5. Click COPY.
The Input 2 EDID is copied to the selected inputs.
Figure 31: EDID Page – EDID Copied
The following message appears:
Figure 32: EDID Management Page – EDID Copy Success
6. Click OK.
EDID is copied from a selected input to the selected input/s.
Copying the Default EDID to an input
VS-44H2 enables copying the default EDID to a selected input.
To read the EDID from the default EDID:
1. In the Navigation pane, click EDID. The EDID Management page appears (see Figure
24).
2. Click Default.
3. Select the input/s (or all the inputs) to which the default EDID is to be copied.
4. Click Copy and follow the instructions on-screen.
Default EDID is copied to the input.