Kramer VS-44H2

Kramer Electronics Ltd.
VS-44H2 – Using Embedded Webpages
16
Using Embedded Webpages
VS-44H2 enables you to configure settings via Ethernet using built-in, user-friendly
webpages.
You can also configure VS-44H2 via Protocol 3000 commands (see Protocol 3000
Commands on page 47).
VS-44H2 webpages enable performing the following:
• Browsing VS-44H2 Webpages on page 17.
• Defining Global Settings on page 18.
• Routing Inputs to Outputs on page 21.
• Defining HDMI Input Port Parameters on page 23.
• Defining HDMI Output Parameters on page 24.
• Managing EDID on page 27.
• Configuring Device Automation on page 32.
• Restarting and Resetting to Factory Default Parameters on page 33.
• Changing Device Name on page 35.
• Setting Authentication on page 36.
• Changing the Ethernet Settings on page 37.
• Performing Firmware Upgrade on page 39.
• Setting Date and Time on page 40.
• Viewing General Version Information on page 41.