Kramer VS-44H2 - Page 59

Kramer Electronics Ltd.
VS-44H2 – Protocol 3000
57
Function
Description
Syntax
Parameters/Attributes
Example
X-AV-SW-
MODE?
Get auto-switch mode.
This is an Extended
Protocol 3000
command.
COMMAND
#X-AV-SW-MODE?<direction_type>. <port_format>.
<port_index>. <signal_type>. <index><CR>
FEEDBACK
~nn@X-AV-SW-MODE<direction_type>. <port_format>.
<port_index>. <signal_type>.
<index>,connection_mode<CR><LF>
The following attributes comprise
the signal ID:
▪ <direction_type> –
Direction of the port:
o OUT – Output
▪ <port_format> – Type of
signal on the port:
o HDMI
▪ <port_index> – The port
number as printed on the front
or rear panel
▪ 1 – Output 1
▪ 2 – Output 2
▪ 3 – Output 3
▪ 4 – Output 4
▪ <signal_type> – Signal ID
attribute:
o VIDEO
▪ <index> – Indicates a specific
channel number when there
are multiple channels of the
same type
connection_mode – Connection
mode
0 – manual
1 – priority
2 – last connected
Get auto switch mode for
Output 1:
#X-AV-SW-MODE?out.hd
mi.1.video.1<CR>
X-LABEL
Set the port label.
Labels are used
commonly by
webpages.
This is an Extended
Protocol 3000
command.
COMMAND
#X-LABEL<direction_type>. <port_format>.
<port_index>,label_txt<CR>
FEEDBACK
~nn@X-LABEL<direction_type>. <port_format>.
<port_index>,label_txt<CR><LF>
The following attributes comprise
the port ID:
▪ <direction_type> –
Direction of the port:
o IN
o OUT
▪ <port_format> – Type of
signal on the port:
o HDMI
▪ <port_index> – The port
number as printed on the front
or rear panel
1 – Input 1
2 – Input 2
3 – Input 3
4 – Input 4
1 – Output 1
2 – Output 2
3 – Output 3
4 – Output 4
label_txt – ASCII characters
without space
Set the port label for Input 1:
#X-LABELin.hdmi.1,dv
d<CR>
X-LABEL?
Get the port label.
Labels are used
commonly by
webpages.
This is an Extended
Protocol 3000
command.
COMMAND
#X-LABEL?<direction_type>. <port_format>.
<port_index><CR>
FEEDBACK
~nn@X-LABEL<direction_type>. <port_format>.
<port_index>,label_txt<CR><LF>
The following attributes comprise
the port ID:
▪ <direction_type> –
Direction of the port:
o IN
o OUT
▪ <port_format> – Type of
signal on the port:
o HDMI
▪ <port_index> – The port
number as printed on the front
or rear panel
1 – Input 1
2 – Input 2
3 – Input 3
4 – Input 4
1 – Output 1
2 – Output 2
3 – Output 3
4 – Output 4
label_txt – ASCII characters
without space
Get the port label for Output
4:
#X-LABEL?out.hdmi.4<
CR>