VS-44H2 – Defining VS-44H2 4K 4x4 Matrix Switcher
Figure 2: VS-44H2 4K 4x4 Matrix Switcher Rear Panel
HDMI™ INPUT Connectors (1 to 4)
Connect to up to 4 HDMI sources.
HDMI OUTPUT Connectors (1 to 4)
Connect to up to 4 HDMI acceptors.
Connect to a PC/serial controller to control the device.
Press and hold for about 8 seconds to reset the configuration
to its default parameters.
Connect to a PC via a LAN.
RS-232 9-pin D-sub Connector
Connect to a PC/serial controller to control the device.
Mains Power Connector Fuse
Turn the device on and off.